{"id":2708,"date":"2026-11-14T09:26:00","date_gmt":"2026-11-14T09:26:00","guid":{"rendered":"https:\/\/cgautopartsshopusa.com\/?post_type=product&p=2708"},"modified":"2026-11-14T12:38:00","modified_gmt":"2026-11-14T12:38:00","slug":"bwl3119-warning-contact-brake-pad-wear-beck-oe-spec-replacement","status":"publish","type":"product","link":"https:\/\/cgautopartsshopusa.com\/?product=bwl3119-warning-contact-brake-pad-wear-beck-oe-spec-replacement","title":{"rendered":"BWL3119 Warning Contact, Brake Pad Wear (BECK OE-Spec Replacement)"},"content":{"rendered":"
\n

The BWL3119 Warning Contact, Brake Pad Wear<\/strong> is a BECK<\/strong> brake pad wear sensor listed under our
\nBrake Pad Wear Sensor<\/a> category at
\nCG Auto Parts Shop<\/a>. Every listing includes a full manufacturer cross-reference
\ntable so you can confirm fitment by part number before you order.<\/p>\n

BWL3119 Warning Contact, Brake Pad Wear \u2014 function and selection<\/h2>\n

A brake pad wear sensor is a resistive or contact-type device clipped to the brake pad backing plate that closes or opens an electrical circuit when the friction material wears to a minimum thickness, triggering a dashboard warning lamp. Some systems measure the gradual increase in resistance as the contact wire is progressively exposed; others simply complete or break a circuit at the threshold.<\/p>\n

Signs You Need a Replacement<\/h2>\n

A persistent brake wear warning lamp that doesn’t clear after a pad replacement usually indicates the sensor itself wasn’t replaced, the connector wasn’t fully seated, or the system needs a diagnostic reset. A warning light that never triggers despite obviously thin pads points to a broken sensor wire or a corroded-open connector.<\/p>\n

Brand & Manufacturing Authority<\/h2>\n

This brake pad wear sensor is manufactured by BECK<\/strong>, a recognised supplier
\nto the automotive aftermarket. The part number BWL3119<\/strong> identifies this specific
\nunit in the manufacturer’s own catalog. It is supplied new \u2014 not remanufactured \u2014 and is backed by our
\nwarranty policy.<\/p>\n

Material & Construction<\/h2>\n

Built from a resistive or contact sensing element in a wear-resistant polyamide housing, pre-wired to a connector that matches the vehicle’s brake monitoring harness pin-out. This construction is chosen to match or exceed the OE
\nspecification it replaces under the same load, temperature, and service conditions.<\/p>\n

Fitment Confidence<\/h2>\n

Year-make-model filters alone can miss mid-year production changes that affect fitment. The safest
\nmethod is to match the part number stamped on your existing brake pad wear sensor against the
\ncross-reference table below. If you can’t locate your existing part number, send your vehicle VIN
\nthrough our contact page and we’ll confirm before you order.<\/p>\n

Product Specifications<\/h2>\n\n\n\n\n\n\n\n
Part Number (SKU)<\/td>\nBWL3119<\/td>\n<\/tr>\n
Part Type<\/td>\nBrake Pad Wear Sensor<\/td>\n<\/tr>\n
Brand<\/td>\nBECK<\/td>\n<\/tr>\n
Condition<\/td>\nNew<\/td>\n<\/tr>\n
Category<\/td>\nBraking > Brake Pad Wear Sensor<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\n \"BWL3119\n<\/p>\n

Cross-Reference Compatibility Table<\/h2>\n

Match your existing part number against this table before ordering. All data is drawn directly
\nfrom the manufacturer’s own cross-reference documentation.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Brand \/ Manufacturer<\/th>\nPart Number(s)<\/th>\n<\/tr>\n<\/thead>\n
A.B.S.<\/td>\n39781<\/td>\n<\/tr>\n
BENDIX Braking<\/td>\nBBI1088<\/td>\n<\/tr>\n
Reference<\/td>\nBORG &amp<\/td>\n<\/tr>\n
BECK<\/td>\nBWL3119<\/td>\n<\/tr>\n
BOSCH<\/td>\n1 987 473 563<\/td>\n<\/tr>\n
BREMBO<\/td>\nA 00 478<\/td>\n<\/tr>\n
DELPHI<\/td>\nLZ0266<\/td>\n<\/tr>\n
FEBI<\/td>\nBILSTEIN ?47371<\/td>\n<\/tr>\n
FERODO<\/td>\nFWI457<\/td>\n<\/tr>\n
HELLA<\/td>\n8DK 355 252-391<\/td>\n<\/tr>\n
LAND ROVER<\/td>\nLR033275<\/td>\n<\/tr>\n
LPR<\/td>\nKS0206<\/td>\n<\/tr>\n
MAGNETI MARELLI<\/td>\n363700400478<\/td>\n<\/tr>\n
MAXGEAR<\/td>\n23-0108<\/td>\n<\/tr>\n
Reference<\/td>\nMEAT &amp<\/td>\n<\/tr>\n
DORIA<\/td>\n212111<\/td>\n<\/tr>\n
METELLI<\/td>\nSU.316<\/td>\n<\/tr>\n
METZGER<\/td>\n1190281<\/td>\n<\/tr>\n
MEYLE<\/td>\n53-14 527 0003<\/td>\n<\/tr>\n
NTY<\/td>\nHCZ-LR-022<\/td>\n<\/tr>\n
OSSCA<\/td>\n24558<\/td>\n<\/tr>\n
QUINTON HAZELL<\/td>\nBWI1222<\/td>\n<\/tr>\n
SCHNIEDER AUTOTECH<\/td>\nLRS88.00190<\/td>\n<\/tr>\n
SWAG<\/td>\n22 94 7371<\/td>\n<\/tr>\n
TEXTAR<\/td>\n98048200<\/td>\n<\/tr>\n
TRW<\/td>\nGIC376<\/td>\n<\/tr>\n
VEMO<\/td>\nV48-72-0078<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Installation & Safety Notes<\/h2>\n

Replace the sensor every time the pads it monitors are replaced. Route the wiring away from moving suspension components and secure against chafing before refitting the wheel. Always follow your vehicle manufacturer’s torque specifications and service
\nmanual procedure. For the engineering standards that govern this part category, see the
\nSAE International brake system standards<\/a>.<\/p>\n

Quality Assurance<\/h2>\n

We verify every listing’s cross-reference data against the manufacturer’s own catalog before
\npublishing. We sell BECK<\/strong> parts because the brand has a documented track record in the
\nbrake pad wear sensor category. If a part number doesn’t match your vehicle after
\nchecking the table above, contact us and we’ll find the correct one.<\/p>\n

Shipping, Returns & Warranty<\/h2>\n

Orders ship from our US warehouse. Delivery windows are on our
\nshipping policy page. If a part arrives damaged or doesn’t fit,
\nthe return and claim process is in our terms of service and
\nwarranty policy. Questions?
\nContact us any time.<\/p>\n

Why Buy From CG Auto Parts Shop<\/h2>\n